Fork seal time .... damnit

Tips, Tricks, Mods, Maintenance questions and answers go on this board.

Moderators: joeracket, Bam Bam, RoadWarrior, mr.biker, Cat

Post Reply
User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Fork seal time .... damnit

Post by McJeep » Sat Sep 02, 2017 3:49 pm

Hey Mo - you still got the uber special Honda fork tool available?????

Not lookin forward to this - especially as the hoppe fairing is fork mounted - time to wire a plug in on the power wires for quick release me thinks ;)
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
joeracket
Site Admin
Posts: 12639
Joined: Thu Aug 14, 2003 11:36 am
Location: chilliwack, b.c.

Re: Fork seal time .... damnit

Post by joeracket » Sat Sep 02, 2017 6:36 pm

:) :) :) ......... Darrel aka chumbly has the fork tool ....... remember your forks are inverted so make sure you put the seals in right side up otherwise you will have major leakage and have to do them all over again ........ :) :) :)
Image IF YOU DON'T STAND BEHIND OUR TROOPS & LEOS - FEEL FREE TO STAND IN FRONT OF THEM !!! Image

Image

User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: Fork seal time .... damnit

Post by McJeep » Sun Sep 03, 2017 11:42 am

yup yup
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
Chumbly
Posts: 4841
Joined: Wed Jul 14, 2004 1:58 am
Location: Abbotsford, B.C.

Re: Fork seal time .... damnit

Post by Chumbly » Thu Sep 14, 2017 6:56 pm

Ya, I've got mine to do too. When ya want the tool, Rob? You got my number?
Image

Image
Still alive and Free....riding on three
'02 1800C "triked"

User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: Fork seal time .... damnit

Post by McJeep » Thu Sep 14, 2017 11:51 pm

'All good buddy - said fukkit and ordered one - it came in yesterday but i haven't gotten down to pick it up yet - doing them this weekend hopefully - need some riding before the weather shyts the bed :cool: :cool:
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
Chumbly
Posts: 4841
Joined: Wed Jul 14, 2004 1:58 am
Location: Abbotsford, B.C.

Re: Fork seal time .... damnit

Post by Chumbly » Sat Sep 16, 2017 7:24 pm

Cool..... :cool: :dance:
Image

Image
Still alive and Free....riding on three
'02 1800C "triked"

User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: Fork seal time .... damnit

Post by McJeep » Sun Oct 22, 2017 7:50 pm

Canuckian tank protection Image

ImageImage
The culprit :( Image

Enough fer today - - - never ever ever fix or reassemble apres beers :nono: :wink: :wink:
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
hammerman
Posts: 6115
Joined: Sun Aug 08, 2004 2:46 pm
Location: Trenton Ont.

Re: Fork seal time .... damnit

Post by hammerman » Mon Oct 23, 2017 7:10 pm

Well eh, done yet or did one brewski lead to a dozen. :doh:

:lol: :lol: :lol:
Hammer It. Life`s journey is not to arrive at the grave safely in a well preserve skin....
but to skid in sideways,totally wornout ,shouting
HOLY SHIT.. What A RIDE ! !

User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: Fork seal time .... damnit

Post by McJeep » Mon Oct 23, 2017 9:43 pm

Was done for the day at that point and things are on hold till I get some new bushings so I can re and re everything while in there
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

User avatar
RoadWarrior
site maintenance
Posts: 1864
Joined: Thu May 12, 2011 4:10 pm
Location: Wooda-bridga, Ontario

Re: Fork seal time .... damnit

Post by RoadWarrior » Tue Oct 24, 2017 5:55 pm

McJeep wrote:
Mon Oct 23, 2017 9:43 pm
Was done for the day at that point and things are on hold till I get some new bushings so I can re and re everything while in there
Let me translate Hammer.....one brew led to a dozen, need to get more beer.....
---
Common sense is NOT common...

Image

User avatar
hammerman
Posts: 6115
Joined: Sun Aug 08, 2004 2:46 pm
Location: Trenton Ont.

Re: Fork seal time .... damnit

Post by hammerman » Wed Oct 25, 2017 7:48 pm

Oh , Thanks Rob ! Sorta like my garage when the 40 Creek runs low eh?

Everything comes to a screeching halt and burn rubber to the LCBO ! :lol: :lol:

Hey, just a minute...that`s no laffin matter. :nono: :nono:

Hammer

User avatar
McJeep
Posts: 3459
Joined: Mon Jul 05, 2004 6:02 pm
Location: Vic

Re: Fork seal time .... damnit

Post by McJeep » Fri Oct 27, 2017 10:43 pm

:dance: :dance: :dance:
2004 1800N Mediochre mileage Oustanding smileage ;0)

Image

Post Reply